OS-Base Royal Enfield Himalayan 450/411 (rackless harness)
Fits your Himalayan 450. No drilling.
- Throwover straps hook to the subframe. No drilling.
- Straps go over the seat. Cinch until the bag stops moving.
- Smallest exhaust gap of the three. Heat shield matters most here.
- Watch the scuff zone on the rear plastics.
- Keep the load light and balanced side to side.
- DRILLING
- No drilling
- HEAT SHIELD
- Not published
- Mount
- soft rackless
- Drilling
- none
- Exhaust side: heat shield Not published
- Vendor load limit
- Not published
- Install
- easy
- Weight
- 1.15 kg
- Price band
- premium
- Warranty
- 10-year guarantee
- Side packs can rub the 450 plastic side panels, Kriega recommends clear protective film. Anchors to the OEM rear rack (rack must stay on); lower straps loop the pillion footrest mounts; X-straps keep packs off the upswept exhaust. One SKU covers 411 2018-2024 and 450 2025-2026.
- 01Mount OS-Adventure packs to the base: roll-top strap through top loop, rear loops through top slots and EVA pads, hook compression straps
- 02Attach OS-Rings to the OEM rear rack and wrap tight with Velcro soft side out
- 03Loop lower straps around the pillion footrest mounts
- 04Place OS-Base on the seat, attach lower straps, thread top straps through the rack OS-Rings and tension
- 05Hook each pack top strap to the opposite X-strap to stabilize and keep off the exhaust
One email. Your exact setup. No spam.