AFADV Fitment

Does this luggage fit my specific adventure bike, and what does it take to mount it?

Pick your bike and get the real fitment picture: what mounts, how it mounts, what it takes. Every combination lists drilling, heat shield, exhaust clearance, load, and the real-world gotchas owners hit. Verified where we could verify it, clearly labeled where we could not. 30 combinations across 6 adventure bikes.

Fitment checked July 2026. Verified or labeled.

A listing tells you the price. It does not tell you whether you need a rack, whether the heat shield is extra, or whether you have to drill.

Your bike

Giant Loop

Siskiyou Panniers (70L)

VENDOR RATED

Fits your Himalayan 450. No drilling.

Full write-up All luggage for this bike
Rackless mount on an adventure bike, schematicThrowover straps go over the seat, the soft bag hangs beside the rear wheel. The exhaust gap is the smallest of the three mounts, so the heat shield rule matters most here. Watch the scuff zone on the side panel.SCHEMATIC, NOT TO SCALE
  1. Throwover straps hook to the subframe. No drilling.
  2. Straps go over the seat. Cinch until the bag stops moving.
  3. Smallest exhaust gap of the three. Heat shield matters most here.
  4. Watch the scuff zone on the rear plastics.
  5. Keep the load light and balanced side to side.
DRILLING
No drilling
HEAT SHIELD
Included
Mount
soft rackless
Drilling
none
Exhaust side: heat shield included
Vendor load limit
Not published
Install
moderate
Weight
4.54 kg
Price band
premium
Warranty
limited lifetime against defects
Real-world gotchas
  • On single-exhaust bikes without racks a perfect left-right alignment is not always possible; remove slack in the top Velcro panels to stop sag toward the rear wheel; rear Velcro straps can slip on rough terrain (Pronghorn straps recommended). Giant Loop shows it fitted on a 411-era Himalayan.
Install steps
  1. 01Join the two bags over the seat with the Velcro panels and cross straps
  2. 02Secure front mounting straps to the passenger footpeg mounts
  3. 03Fix rear Velcro strips and remove all slack to prevent sag
  4. 04Fit the included Hot Springs heat shields on the exhaust side

One email. Your exact setup. No spam.

Rider reported and vendor data. Prices, availability, and fitment can change, so confirm on the retailer's page before you buy.

Rider input
Ran this setup yourself?

Which adapters did this setup need?

Do I even need a rack for soft bags?

Not always. 25 of the 30 combinations in this tool mount rackless: throwover straps, no rack at all. The other 5 mount on a rack or carrier. Separately, 10 of the 30 name a specific companion rack or support in the Pairs-with row, required on some, optional stability and exhaust gap on others.

Will it melt on the exhaust?

Of the 30 combinations, 11 include a heat shield, 9 need one bought separately, and for the other 10 the vendor publishes no heat answer, so the card says Not published. No vendor documents any of the 30 as clearing a stock exhaust by design. Pick your combination above and the heat answer is on the card.

What else will I need?

The bag is half the answer. 10 of the 30 combinations pair with a named rack or support, listed per combination in the Pairs-with row, down to Kawasaki's own side case racks on the KLR. 30 of 30 mount with no drilling at all.

How much weight can a rear rack take?

Of the six bikes on this site, three carry a published rear rack rating and three do not. The three published ratings run from 2 kg to 9 kg. A rack rating is the load permitted on top of the rack itself, not the rack's own weight and not what the motorcycle can carry. The table lists the three published ratings first, then the three bikes with no published rating, and names where each rating was published.

MotorcyclePublished rear rack ratingWhere the rating was published
Kawasaki KLR 6509 kg2026 owner's manual
Harley-Davidson Pan America 12502.5 kgWarning label 14002804, recorded in the 2021 owner's manual
Suzuki DR-Z4S2 kgSuzuki genuine accessories catalogue, 2025
Yamaha Tenere 700Not published2025 owner's manual, Canada market, prints no rating for the rear carrier
Royal Enfield Himalayan 450Not publishedNovember 2025 UK owner's manual defers to the accessory fitting instructions
Honda CRF300LNot published2025 owner's manual shows no rear carrier

Soft luggage that carries its load on the seat rather than on the rack is not bound by these rack ratings.

Two of the three published ratings are 2 kg and 2.5 kg. Kawasaki and Harley both state in writing that a luggage rack is designed for light items only.

Deliberately not in this table: whether each rack is standard equipment or an optional accessory. That is a factual claim we have not read for every bike, so we do not make it.

Source line: each figure is sourced on the relevant bike page.

Where should luggage weight go on an adventure bike?

Low, central, and balanced left to right. The owner's manuals for all six motorcycles on this site print the same instruction, each in its own words.

  • Yamaha: keep cargo and accessory weight as low and close to the motorcycle as possible, heaviest items near the centre, weight even on both sides.
  • Kawasaki: all baggage as low as possible to reduce the effect on the centre of gravity, distributed equally on both sides.
  • Suzuki: keep cargo weight low and as close to the centre as possible, balance the load between the left and right side.
  • Honda: tie all luggage securely, evenly balanced, and close to the centre of the vehicle.
  • Royal Enfield: keep luggage weight concentrated close to the motorcycle and as low as possible, distribute weight evenly on both sides.
  • Harley-Davidson: keep cargo weight concentrated close to the motorcycle and as low as possible, distribute weight evenly on both sides.

Royal Enfield and Harley-Davidson both add the same warning about the front of the bike: do not add weight to the handlebars or the front forks.

Six manufacturers, six separate documents, one instruction.

Is there a speed limit for a loaded adventure bike?

Two of the six owner's manuals on this site print one. Kawasaki sets 130 km/h for the 2026 KLR 650 when carrying a passenger or cargo. Royal Enfield sets 110 km/h for the Himalayan 450, UK English edition of November 2025, when riding solo, carrying a pillion, or carrying a payload on an accessory-equipped motorcycle. Note the difference: Kawasaki's applies once the bike is loaded, Royal Enfield's applies to an accessory-equipped bike even solo.

Both are limits on how fast a loaded bike should be ridden. Neither is a top speed.

The other four manuals we read do not print a loaded speed limit. That is what we found in those documents, not a statement that no limit exists.

Source line: each figure is sourced on the relevant bike page.

Browse the fitment data

The full fitment write-up for each bike.

All soft luggage