OS-Base Honda CRF300L / CRF300 Rally (rackless harness)
Fits your CRF300L / CRF300L Rally. No drilling.
- Throwover straps hook to the subframe. No drilling.
- Straps go over the seat. Cinch until the bag stops moving.
- Smallest exhaust gap of the three. Heat shield matters most here.
- Watch the scuff zone on the rear plastics.
- Keep the load light and balanced side to side.
- DRILLING
- No drilling
- HEAT SHIELD
- Not published
- Mount
- soft rackless
- Drilling
- none
- Exhaust side: heat shield Not published
- Vendor load limit
- Not published
- Install
- easy
- Weight
- 0.8 kg
- Price band
- premium
- Warranty
- 10-year guarantee
- Base sides can rub the plastic side panels, Kriega recommends clear protective film. Initial install replaces the two rear Honda hook mounts with alloy mounts, thread lock with 24h cure before riding. Carries paired OS-6/OS-12/OS-18 packs (12-54L with a center pack), NOT OS-32. One harness covers L and Rally.
- 01Replace the two rear Honda hook mounts with the Kriega alloy mounts (2x 70mm M8, Torx T-40, thread lock, 24h cure)
- 02Fit the OS-Dirtbike ring around the left frame above the pillion peg
- 03Attach the chosen pair of OS packs to the OS-Base off the bike
- 04Position the base over the seat, route straps through the ring and the metal exhaust guard loop, hook top straps to the alloy mounts and tension
One email. Your exact setup. No spam.