Tusk

Excursion Rackless Luggage System (Tenere 700 2021-2024)

Fitment checked July 2026. Verified or labeled.

The bottom line

Fits the Tenere 700: soft rackless, no drilling, heat shield included.

soft racklessNo drillingHeat shield included
Verified
No photos yet

Where to buy

Find this gear

We may earn a commission if you buy through this link. Your price stays the same. Confirm fitment with the retailer before you buy.

Specs

Brand
Tusk
Product
Excursion Rackless Luggage System (Tenere 700 2021-2024)
Category
soft luggage
Type
soft pannier system
Price band
budget
Weight
Not published
Warranty
Tusk/RMATV warranty
Mount types
soft rackless

How it mounts

Static reference, one per mount type.

soft rackless
Rackless mount on an adventure bike, schematicThrowover straps go over the seat, the soft bag hangs beside the rear wheel. The exhaust gap is the smallest of the three mounts, so the heat shield rule matters most here. Watch the scuff zone on the side panel.SCHEMATIC, NOT TO SCALE
  1. Throwover straps hook to the subframe. No drilling.
  2. Straps go over the seat. Cinch until the bag stops moving.
  3. Smallest exhaust gap of the three. Heat shield matters most here.
  4. Watch the scuff zone on the rear plastics.
  5. Keep the load light and balanced side to side.

Fits these bikes

BikeMountDrillingHeat shieldVendor load limitInstall
Verifiedsoft racklessnoneIncludedNot publishedeasy

On the Yamaha Tenere 700

Mount: soft rackless. Install: easy. Heat shield included.

Owner reports: right bag can snag a boot when swinging a leg over; instructions are vague, use blue Loctite on the base fasteners and re-check after the first rough ride. 15L per side (~30L total) plus Defender waterproof liners.

Rider input

Which adapters did this setup need?

Get notified

Save your setup

One email. Your exact setup. No spam.

Next step

See if this bag fits your bike.

Open fit tool