Kriega
OS-Base Yamaha Tenere 700 (rackless harness)
Fitment checked July 2026. Verified or labeled.
The bottom line
Fits the Tenere 700: soft rackless, no drilling.
soft racklessNo drillingHeat not published
VerifiedWhere to buy
Find this gear
We may earn a commission if you buy through this link. Your price stays the same. Confirm fitment with the retailer before you buy.
Specs
- Brand
- Kriega
- Product
- OS-Base Yamaha Tenere 700 (rackless harness)
- Category
- soft luggage
- Type
- rackless harness
- Price band
- mid
- Weight
- Not published
- Warranty
- 10-year guarantee
- Mount types
- soft rackless
How it mounts
Static reference, one per mount type.
- Throwover straps hook to the subframe. No drilling.
- Straps go over the seat. Cinch until the bag stops moving.
- Smallest exhaust gap of the three. Heat shield matters most here.
- Watch the scuff zone on the rear plastics.
- Keep the load light and balanced side to side.
Fits these bikes
| Bike | Mount | Drilling | Heat shield | Vendor load limit | Install |
|---|---|---|---|---|---|
| Verified | soft rackless | none | Not published | Not published | easy |
On the Yamaha Tenere 700
Mount: soft rackless. Install: easy. Heat shield Not published. Pairs with no rack, and it will not clear rear-peg tail racks.
Kriega officially warns the harness sides can abrade the T7 side panels; apply clear protective film at contact points. T7 forum caution: the skin-tight T7 version will NOT fit if a tail rack is bolted to the four rear pegs. Purpose-shaped body keeps distance from the exhaust.
Rider input
Which adapters did this setup need?
Get notified
Save your setup
One email. Your exact setup. No spam.
Next step